Description
This lightning protection kit is composed of products, manufactured in France, reflecting the expertise and experience of LPS France . Accessories (masts, conductors, grounding) will need to be added to create a complete lightning protection system.
To find out the protection radius of the lightning rod included in this kit, consult its product sheet. Calculating the most suitable protection radius for the site to be protected, based on its level of protection, can be easily done using the LPS Manager .
LPS France products comply with NFC17102:2011, IEC 62305, IEC 50164, IEC 62561 standards and equivalent country standards.
To request a study of your project from our services, please fill out the form accessible via this link.
-
Ellips lightning rod 25 µs triggering time (Ref. 10006) :
Combining advanced materials and technologies, the Ellips® 1.2 lightning rod provides protection against direct lightning strikes to all structures or open spaces.
-
Conductive lightning rod connector (Ref. 10012) :
Stainless steel lightning rod-conductor connector that screws into the base of the lightning rod. M20 thread. The conductor is secured by tightening – stainless steel screws supplied.
-
Round sleeve for attaching the lightning rod to the support (Ref. 11010) :
Aluminium adaptation (colouring possible /carbon default) with a round section of 32 mm inner diameter (40 mm outer diameter) – tri-directional clamping on the support by stainless steel screws supplied.
-
Compt@ir ® – Lightning Strike Counter (Ref. 43603) :
Compt@ir lightning strike counter consists of a digital display. Each lightning strike is recorded as it passes by incrementing by one unit (the rightmost digit). Add one of the Contact@ir System to your Compt@ir to make your lightning protection system connected.
-
1 Danger warning sign for earth connection (Ref. 43607) :
Marking plate of possible danger near an earthing system
-
Control seal (Ref. 43604) :
The test joint allows the down conductor to be disconnected from the earth electrode in order to measure its ohmic resistivity. Standard markings. Supplied with M5 stainless steel tightening screws.
