Cut-off terminal – Lightning rod control joint

  • Ref. 43604/ ED-JC01
  • Control joint
  • Allows you to disconnect the down conductor from the earth connection
  • Normative marking
  • Material: aluminum
  • Supplied with M5 stainless steel tightening screws
  • Dimensions: diameter: 50 mm, thickness: 20 mm
  • Weight: 0.054 kg

 

Complies with EN 62561-1, NFC 17-102:2011 and IEC 62305 standards.

Download the technical sheet

Add to quote

Description

Control Joint / Cut-off Terminal: Essential Component to ensure resistance measurements of lightning rod earthing systems

Introduction to Joint Control:

In lightning protection systems, the control joint or cutoff terminal plays a crucial role. In general, it is placed above the protective sheath or approximately 2.10 m in height. It can also be placed in an inspection manhole. Thus, it joins two parts of the same conductor.

In fact, the control joint connects the upper part (down conductor) and the lower part (earthing). Our specific product, referenced under number 43604, is designed to optimize the safety and efficiency of these systems.

Feature and Application:

The main purpose of this cut-off and test terminal is to disconnect the grounding conductor from the lightning rod's earthing system. In fact, this disconnection capacity is essential for measuring the ohmic resistivity of the earthing system. In other words, it makes it possible to control the effectiveness of the earthing system by measuring its ability to conduct electric current into the ground.

Technical characteristics:

Made of aluminum, the LPS France control joint is light but robust. It is supplied with M5 stainless steel screws for easy and secure assembly. Thus, with a diameter of 50 mm and a thickness of 20 mm, it weighs only 0.054 kg, which makes it handy and easy to install.

Compliance and Standards:

This product strictly complies with EN 62561-1, NFC 17-102:2011 and IEC 62305 standards, ensuring its quality and reliability in lightning protection installations. This guarantees that the control joint actually allows the measurement of the grounding conductor earthing system resistance. But also that it ensures perfect electrical continuity between the two parts of the lightning descents.

Essential Role in Security:

The LPS France control joint is a fundamental element to guarantee the correct ohmic measurement of the earthing system. Therefore, it plays a key role in preventing lightning risks. The measurement is carried out with a Earth resistance measurer available in our catalog.

Further information

Weight 0.054 kg
Dimensions 50 × 20mm

You might also like…