Description
Flat red copper conductor 30x2mm
The flat bare copper (red copper) conductor of 30×2 mm plays a crucial role in lightning protection systems. Indeed, its dimensions, in compliance with standards, measure 30 mm wide and 2 mm thick. Packaged in rings of approximately 50 meters and weighing approximately 26 kg, this conductor is easily transported and installed. It is important to choose suitable fixings for effective installation on various supports, using clips, plastic staples, crampons, lead plugs, collars, etc.
Used as an overhead down conductor and buried conductor for grounding conductor earth connections, this flat bare copper conductor is ideal for type A (A1 and A2) and type B grounding conductor earth connections. It is also used for all needs. equipotentiality. Its high conductivity and cross section make it excellent for conducting lightning current. However, it is susceptible to corrosion over time and requires regular monitoring.
This 30x2mm red copper flat conductor complies with EN 62561-2, NFC 17-102:2011 and IEC 62305 standards.
The electrical conductivity of this copper conductor is excellent. However, its natural corrosion is quite rapid (“verdigris”). This corrosion tends to “dirty” the walls. A tinned conductor does not show corrosion, for example. In addition, its price is higher than that of 30×2 mm tinned copper. Therefore, the flat red copper conductor 30x2mm rather for lightning rod installations in the historic area. Others conductors are available in our store.
You will be able to use this product in the application LPS Manager
