Description
Round sleeve for adapting a ESE Ellips ® or Paraton@ir ® lightning rod to an existing elevation support
The round sleeve is a specific adaptation part intended for the connection and fixing between our ESE Ellips ® or Paraton@ir ® lightning rods and existing support. To avoid a sometimes high purchase price compared to local production and transport costs, we offer this ESE/tube adapter.
Our Lightning Rods with Starting Device are equipped with an M20 threaded pin for their attachment to our elevation masts (1st element – galvanized steel or stainless steel).
So, if a single mast or point exists on the project or if a tube is available to become a elevation mast mast, the round sleeve becomes relevant. In fact, the sleeve is equipped with an M20 thread to receive the ESE. Consequently, the sleeve easily ensures the connection between the Early Streamer Emitter Lightning Rod and its new support.
Specific conditions:
The diameter of the tube or mast or single point must be less than 32 mm outside diameter. The round sleeve is tightened in three directions on the support using stainless screws provided.
Finally, the round sleeve is compatible with the ESE/conductor lightning rod connection.