Called an early streamer emission (ESE) lightning rod Paraton@ir®With reference to the French language and its communication capabilities, our product is manufactured with the utmost care in our workshops in France.
We have 4 Paraton@ir models that differ according to their initiation distances/devices: the Paraton@ir 10, the Paraton@ir 25, the Paraton@ir 45 and Paraton@ir 60. The Paraton@ir The most suitable option for your site will be selected by our design office after studying your project.
Protection radius in meters (m):
Protection radius in meters (m):
Protection radius in meters (m):
Protection radius in meters (m):
See lightning rods. The protection radius of an Early Streamer Emission (ESE) lightning rod is related to its height (h) relative to the surface to be protected, its efficiency, and the selected protection level. According to standard NFC 17102:2011, it is calculated from the
1. Paraton@ir® loads:
The element called the "charger" is designed to accumulate natural ions in the "Central Inductive System" (patented). This accumulation occurs as rapidly and in the same proportions as the increase in the ambient electric field generated by an updraft tracer.
2. Paraton@ir® creates an electric field of considerable magnitude:
At the same time, thanks to the "Central Inductive System" and the "Booster," the lightning rod with early streamer emission device Paraton@ir® This creates a gigantic electric field with a charge opposite to that of the natural electric field present and stimulates the "Capture Head". Depending on their number, the "Triggering Poles" increase the efficiency of the initiation tenfold.
3. Lightning capture and conduction by the early streamer emission (ESE) lightning rod Paraton@ir® :
System priming Paraton@ir® attracts the descending tracer and creates the conditions for a “lightning strike”. The capture tip then guides the lightning current along its axis towards the grounding conductors.
Lightning protection should be checked annually and after each lightning strike to ensure it is functioning properly.
We have developed an innovative remote reporting solution for lightning events and protection status. This solution is called: Contact@ir® System.
Compatible with existing or new lightning protection systems, surge protection systems, and grounding systems, from our brand or competing manufacturers.
A transmitter Contact@ir® communicates the data from your lightning protection system.
A transmitter can be connected Contact@ir® on each Paraton@irproduct, as well as on all other products in the range Contact@ir® Ready Compt@ir, Alert@ir XT, Alert@ir DC…).
The transmitter Contact@ir® then continuously communicates the product's operating status Contact@ir® Ready as well as its communication reliability. Communication is ensured by radio link, without any physical connection.
This system transmits a real-time alert when a lightning strike is detected by the product Contact@ir® ReadyThis alert indicates the power level of the lightning strike. A verification and maintenance intervention must be scheduled according to the severity of the lightning strike.
With our system, you can remotely perform an initial diagnosis. This will optimize the visit of the maintenance service, avoid unnecessary costs, and ensure your lightning protection system remains in good working order.
Efficient, reliable and practical, the system Contact@ir® facilitates the control and maintenance of your lightning protection system.
The system Contact@ir® promotes the prevention of risks related to lightning.
Data transmission occurs via radio waves, without any physical link between the transmitter and the transmitter Contact@ir® and the receiver Dongl@ir®.
In this way Dongl@ir® simplifies and secures the diagnosis of a product that is often difficult to access, as the technician is no longer required to put themselves in a perilous situation to reach it.
Dongl@ir® It is a means of spot diagnosis. It is used in close proximity to the product (maximum 80 m).
In just a few seconds, your product is identified and the diagnostic results appear on your screen. You then know immediately whether or not intervention on your installation is necessary.
The system Contact@ir® used with the receiver Rout@ir® allows you to check the proper functioning of your product in real time and without having to travel.
If one of your products is struck by lightning, you will immediately receive an alert.
Your products equipped with a transmitter Contact@ir® communicate constantly via radio waves with your Rout@ir® located nearby.
The data collected by Rout@ir® are continuously transmitted to the server on which they are recorded and dated without any intervention on your part.
The multiplicity of networks usable by Rout@ir® The transmission of this data makes it possible to use it even in the most isolated locations. The data can be accessed in real time and remotely from any internet-connected device.
Use our "Plug & Play" solution on our range Contact@ir® Ready and monitor your lightning protection systems in real time.
The sender Contact@ir MD® uses the local mobile network to send critical information about your products.
This information contributes to the preventive maintenance of your installations without any travel required on your part.
Data is received in the LPS Manager application (www.lpsmanager.io), downloadable on your smartphone or tablet from Google Play Store Or Apple Store.
Contact@ir System
The issuers
Receivers
The kits
Other compatible products
LPS Manager
