Description
This lightning rod kit is made up of products, manufactured in France, characteristic of the know-how and experience of LPS France . Accessories (masts, conductors, grounding) must be added to constitute a complete lightning protection installation.
To find out the protection radius of the lightning rod included in this kit, consult its product sheet. Calculating the protection radius best suited to the site to be protected based on its level of protection can be done simply with the application LPS Manager.
LPS France products comply with NFC17102:2011, IEC 62305, IEC 50164, IEC 62561 and equivalent country standards.
To request a study of your project from our services, fill out the form accessible from this link.
-
Paraton@ir 25 (natural), triggering advance 25 µs (Ref. 10002) :
The Paraton@ir ® Intelligent Early Streamer Emitter Lightning Rod ensures protection against direct lightning strikes of all structures or open spaces.
Ease and efficiency of tracking are guaranteed thanks to the Contact@ir transmitter and the Rout@ir receiver. Product of the range Contact@ir ® Ready.
-
Conductor lightning rod connection (Ref. 10012) :
Stainless steel lightning rod-conductor connection screwed into the base of the lightning rod. M20 thread The conductor is fixed by tightening – stainless screws supplied.
-
Round sleeve for fixing the lightning rod to the support (Ref. 11010) :
Aluminum adaptation (coloring possible / carbon default) with round section of 32 mm diam. interior (40 mm exterior diam.) – tri-directional tightening on the support using stainless screws provided.
-
Contact@ir – Information transmitter (Ref. 50001) :
The transmitter Contact@ir ® constantly communicates the operating status of the Paraton@ir® 10 as well as its communication reliability. Communication is ensured by radio link, without any physical link. Used with receiver Rout@ir ®, it transmits a real-time alert when a lightning strike is detected by the Paraton@ir® 10 and saves it. Product of the range Contact@ir ® System.
-
Rout@ir – Data reception (Ref. 50003) :
The transmitter Contact@ir ® used with receiver Rout@ir ® transmits a real-time alert when a lightning strike strikes the protection installation. The Rout@ir ® is considered a counting element. Product of the range Contact@ir ® System.
-
1 Danger marking plate for earthing system (Ref. 43607) :
Marking plate of possible danger near an earthing system
-
Control joint (Ref. 43604) :
The control joint allows you to disconnect the down conductor from the earth connection in order to measure the ohmic resistivity of the latter. Normative marking. Supplied with M5 stainless steel tightening screws.
A question about the KCRP 25 lightning rod kit? Contact us.
