Paraton@ir ® early streamer emission lightning rod , in reference to the French language and its communication capabilities, our product is manufactured with the greatest care in our workshops in France.
We have 4 Paraton@ir which differ according to their distances/priming devices: the Paraton@ir 10, the Paraton@ir 25, the Paraton@ir 45 and Paraton@ir 60. The Paraton@ir best suited to your site will be selected by our design office after studying your project.
Protection radius in meters (m):
Protection radius in meters (m):
Protection radius in meters (m):
Protection radius in meters (m):
See lightning rods. The protection radius of an Early Streamer Emission (ESE) lightning rod is related to its height (h) relative to the surface to be protected, its efficiency, and the selected protection level. According to standard NFC 17102:2011, it is calculated from the
1. Paraton@ir ® takes care of:
The element called the "charger" is designed to accumulate natural ions in the "Central Inductive System" (patented). This accumulation occurs as rapidly and in the same proportions as the increase in the ambient electric field generated by an updraft tracer.
2. Paraton@ir ® creates an electric field of considerable magnitude:
At the same time, thanks to the "Central Inductive System" and the "Booster," the Paraton@ir early creates a gigantic electric field with a charge opposite to that of the natural electric field present and stimulates the "Capture Head." Depending on their number, the "Early Exploration Poles" increase the efficiency of the initiation tenfold.
3. Lightning capture and conduction by the Paraton@ir early :
The Paraton@ir system attracts the descending tracer and creates the conditions for a "lightning strike". The capture tip then guides the lightning current along its axis towards the grounding conductors.
Lightning protection should be checked annually and after each lightning strike to ensure it is functioning properly.
We have developed an innovative remote reporting solution for lightning events and protection status. This solution is called: Contact@ir ® System .
Compatible with existing or new lightning protection systems, surge protection systems, and grounding systems, from our brand or competing manufacturers.
A Contact@ir ® communicates data from your lightning protection installation.
Contact@ir ® transmitter can be connected to each Paraton@ir , as well as to all other products in the Contact@ir ® Ready Compt@ir , Alert@ir XT, Alert@ir DC…) .
Contact@ir transmitter then continuously communicates the operating status of the Contact@ir Ready as well as its communication reliability. Communication is ensured via radio link, without any physical connection.
This system transmits a real-time alert when a lightning strike is detected by the Contact@ir Ready . This alert includes the power level of the lightning strike. A verification and maintenance intervention must be scheduled according to the severity of the lightning strike.
With our system, you can remotely perform an initial diagnosis. This will optimize the visit of the maintenance service, avoid unnecessary costs, and ensure your lightning protection system remains in good working order.
Contact@ir ® system facilitates the control and maintenance of your lightning protection system.
Contact@ir ® system promotes the prevention of risks related to lightning.
Data transmission is done via radio waves, without any physical link between the Contact@ir ® Dongl@ir ® receiver .
In this way Dongl@ir® simplifies and secures the diagnosis of a product that is often difficult to access, as the operator is no longer obliged to put themselves in a perilous situation to reach it.
Dongl@ir® is a spot diagnostic tool. It is used in close proximity to the product (maximum 80 m).
In just a few seconds, your product is identified and the diagnostic results appear on your screen. You then know immediately whether or not intervention on your installation is necessary.
Contact@ir ® system used with the Rout@ir ® allows you to check the proper functioning of your product in real time and without having to move.
If one of your products is struck by lightning, you will immediately receive an alert.
Your products equipped with a Contact@ir transmitter communicate continuously via radio waves with your nearby
Rout@ir device The data collected by Rout@ir is continuously transmitted to the server where it is stored and time-stamped without any intervention on your part.
The multiple networks that Rout@ir can to transmit this data make it usable even in the most remote locations. The data can be accessed remotely and in real time from any internet-connected device.
Use our "Plug & Play" solution on our Contact@ir ® Ready and monitor your lightning protection installations in real time.
The Contact@ir MD ® uses the local mobile network to send critical information about your products.
This information contributes to the preventive maintenance of your installations without any travel required on your part.
Data is received in the LPS Manager application ( www.lpsmanager.io ), which can be downloaded to your smartphone or tablet from the Google Play Store or Apple Store .
Contact@ir System
The issuers
Receivers
The kits
Other compatible products
LPS Manager
