Description
This lightning rod kit is made up of products, manufactured in France, characteristic of the know-how and experience of LPS France . Accessories (masts, conductors, grounding) must be added to constitute a complete lightning protection installation.
To find out the protection radius of the lightning rod included in this kit, consult its product sheet. Calculating the protection radius best suited to the site to be protected based on its level of protection can be done simply with the application LPS Manager.
LPS France products comply with NFC17102:2011, IEC 62305, IEC 50164, IEC 62561 and equivalent country standards.
To request a study of your project from our services, fill out the form accessible from this link.
-
Lightning rod Ellips ® 1.4 (natural), advances to boot 60 µs (Ref. 10008) :
Combining cutting-edge materials and technologies, the Ellips ® 1.4 lightning rod provides protection against direct lightning strikes to all structures or open spaces.
-
Conductor lightning rod connection (Ref. 10012) :
Stainless steel lightning rod-conductor connection screwed into the base of the lightning rod. M20 thread The conductor is fixed by tightening – stainless screws supplied.
-
1 Round sleeve for fixing the lightning rod to the support (Ref. 11010) :
Aluminum adaptation (coloring possible / carbon default) with round section of 32 mm diam. interior (40 mm exterior diam.) – tri-directional tightening on the support using stainless screws provided.
-
Compt@ir ® – Lightning strike counter (Ref. 43603) :
The lightning strike counter Compt@ir ® is composed of a digital display. Each lightning strike is recorded as it passes by the increment of one unit (rightmost digit). Add one of the options Contact@ir ® System to your Compt@ir ® to make your lightning protection installation communicating.
-
1 Danger marking plate for earthing system (Ref. 43607) :
Marking plate of possible danger near an earthing system
-
Control joint (Ref.43604) :
The control joint allows you to disconnect the down conductor from the earth connection in order to measure the ohmic resistivity of the latter. Normative marking. Supplied with M5 stainless steel tightening screws.
