Description
This lightning rod kit is made up of products, manufactured in France, characteristic of the know-how and experience of LPS France . Accessories (masts, conductors, grounding) must be added to constitute a complete lightning protection installation.
To request a price for this lightning rod kit, do not hesitate to use the “add to your quote” button.
To find out the protection radius of the lightning rod included in this kit, consult its product sheet. Calculating the protection radius best suited to the site to be protected based on its level of protection can be done simply with the application LPS Manager.
LPS France products comply with NFC17102:2011, IEC 62305, IEC 50164, IEC 62561 and equivalent country standards.
To request a study of your project from our services, fill out the form accessible from this link.
The Ellips ® 1.3 lightning rod kit is composed of:
-
A Lightning Rod unit Ellips ® 1.3 (natural), advances to boot 45 µs (Ref. 10007) :
Combining cutting-edge materials and technologies, the Ellips ® 1.3 lightning rod provides protection against direct lightning strikes to all structures or open spaces.
-
A unit Conductor lightning rod connection (Ref. 10012) :
Stainless steel lightning rod-conductor connection screwed into the base of the lightning rod. M20 thread The conductor is fixed by tightening – stainless screws supplied.
-
A unit Round sleeve for fixing the lightning rod to the support (Ref. 11010) :
Aluminum adaptation (coloring possible / carbon default) with round section of 32 mm diam. interior (40 mm exterior diam.) – tri-directional tightening on the support using stainless screws provided.
-
A unit Compt@ir ® – Lightning strike counter (Ref. 43603) :
The lightning strike counter Compt@ir ® is composed of a digital display. Each lightning strike is recorded as it passes by the increment of one unit (rightmost digit). Add one of the options Contact@ir ® System to your Compt@ir ® to make your lightning protection installation communicating.
-
A unit Danger plate for earth connection (Ref. 43607) :
Marking plate of possible danger near an earthing system
-
A unit Control joint or cut-off terminal (Ref.43604) :
The control joint allows you to disconnect the down conductor from the earth connection in order to measure the ohmic resistivity of the latter. Normative marking. Supplied with M5 stainless steel tightening screws.
